Lithium Battery – LiPo 12v Nominal 100Ah Capacity
Specifications
· Nominal capacity 100Ah
After the standard charge, 0.2C dischargeto9.0V 0.2C 9.0V Minimum capacity 200Ah
· Maximum Capacity 100Ah
After the standard charge, 0.2C dischargeto9.0V 0.2C 9.0V Minimum capacity 200Ah
· Weight 15 Lbs approx.
· Dimensions 3.7in x 7.2in x 10.4in
· Charge Limit Voltage 12.6v
· Discharge cut-off voltage 9.0v
· Standard charge current 10A - 10A (0°~45°)
· Maximum discharge current 80A - 80A (0°~45°)
· Operating temperature 0°~45°Charging
· Operating temperature -20°~60°//discharging
· Storage temperature -10°~ +45° - if lessthan a month
· Storage temperature -10°~ +35° if lessthan 6 months
· Storage Humidity =75% RH
· Dimensions 140mm x 280mm x 300mm
Safe Characteristic
· Overcharge testing (NO PCM)
At standard testing condition charging cell with
constant current 2.0A to voltage 13.8V, then with
constant voltage 13.8V till current decline to 0. Stop
test till cells temperature 10? lower than max
temperature.
· Forced discharge
After the standard discharge of the electric core, the
1.0C current to its reverse charging, 90min
· Short-circuit testing
At standard testing condition after standard charging,
connect pack anode and cathode by wire which
impedance less than 80±20m?, keep 24h.
· Drop Test
After the charge of the electric core from 1.0meters
height fell to the ground each surface of the concrete fell 1
timesa total of 6 tests
Protection circuit
· VDET1 Over-Chargedetect voltage. Min. 4.255*3, Typical 4.28*3, Max. 4.275*3, Unit V
· VDET2 Over-dischargedetect voltage. Min. 2.95*3, Typical 3.0*3, Max. 3.05*3, Unit V
· IEC Discharge over current protection. Min. 80, Typical90, Max. 120, Units V
· IDD Supply current, Min. 1, Typical 5, Max. 10,Unit µA
· RD Internal resistance in normal operation, Min.15, Typical 25, Max. 65, Unit mO
Warning
Load circuit may cause voltageand current, and the voltage or current may add to pack, the voltage or currentmust be
controlled as lower than RWV andRWI, larger voltage or current may damage the PCM of pack.
To prevent the possibility of thepack from leaking, heating, fire. please observe the following precautions:
The soft aluminum packing foil isvery easily damaged by sharp edge parts such as Ni-tabs, pins and needles.Don’t strike at pack
with any sharp edge parts.
Do not immerse the pack in waterand seawater
Do not use and leave the packnear a heat source as fire or heater
When recharging, use the batterycharger specifically for that purpose
Do not reverse the position andnegative terminals
Do not connect the pack to anelectrical outlet