12V Lithium Battery LifePo4 - 50Ah ( 12.8V )

Selected Color:


(79 Left)


(2 Left)

Product Code:

Price: $ 586.99

Product: Lithium Battery LiFePo4  12.8V 50Ah ( 10Amps Charger is included )
Model: LFP 50-12.8  (12.8V 50Ah

Electrical Characteristics:
•    Nominal Voltage: 12V
•    Nominal Capacity: 50Ah
•    Energy: 640WH
•    Internal Resistance: =50mO
•    Cycle Life: >2000 cycles @0.5C 100%DOD
•    Months Self Discharge: <3%
•    Efficiency of Charge: 100% @0.5C
•    Efficiency of Discharge: 96~99% @1C

Standard Charge:
•  Standard Charge Current: 10A
• Max. Charge Current: 50A
• Charge Voltage: 14.6±0.2V
•  Charge Mode: 0.2C to 14.6V, then 14.6V,charge current to 0.02C (CC/CV)
•  Charge Cut-off Voltage: 14.6V±0.2V  

Standard Discharge:
• Continuous Current: 80A
• Max. Pulse Current: 270A (<1s)
• Discharge Cut-Off Voltage: 9.2V

• Charge Temperature: 0  Degree to 45 Degree (32F to 113F) @60±25% Relative Humidity
• Discharge Temperature: -20 Degree to 60 Degree (-4F to 140F) @60±25%Relative Humidity
• Storage Temperature: 0 Degree to 40 Degree (32F to 104F) @60±25% Relative Humidity
• Water Dust Resistance: IP55

• Plastic Case: PC+ABS
• Dimensions (mm): H178 x W196 x L165
• Weight: 7Kg

In Compliance with:

  • In Compliance with ISO (International Organization for Standardization)
  • In Compliance with CE (European Conformity)
  • In compliance with RoHS (Restriction of Hazardous Substances)


Prevent battery over heat and explosion

1.- A: BMS control the charge/discharge current, prevent big charge/discharge current to avoid battery produce much heat and cause battery physiosis  and explosion.

B: Mean while BMS control the upper/lower of voltage to avoid overcharge and discharge.

2.- A:In battery design, we choose more safety material Lifepo4 battery cell, the advantage is it is the most safety in theLifepo4 battery raw material, and is still stable under 500 degree high temperature.

B: In battery diaphragm, we use ceramic diaphragm for improve the safety and when the diaphragm, the pore closure.

C: In battery case, we use the case with explosion-proof valve, when the battery internal pressure reach 3~8kg(Every model is different),explosion-proof valve will open and release internal pressure.

D:  In battery production, after battery assembly, we will adopt high voltage to test the short circuit to prevent it.

E: Complete battery testing, we adopt high temperature 45degree 7days or normal temperature 30days to proceed voltage drop testing, when voltage drop bigger than 0.02V,we will test again and if two times same testing result, we will handle the battery as scrap.

    F: When battery testing, we will test voltage drop and insulation value to prevent bad quality battery to sell outside.

G:  Battery external packing material will use flame retardant materials.

H:  Plate cutting process strictly control plate batch of Feng and burrs to avoid battery internal short circuits.(Burrs<10µm)

I: No dust workshop,avoid dust in the environment or metal debris import battery safety.(Dust <10µm)

Related Products: